I wrote step by step instructions for installing windows repacks on linux using Lutris. https://sopuli.xyz/comment/9858101
I install FG Dodi and Gnarly repacks and ElAmigos updates this way. I have only had weird bugs with ~5 that would only unpack in a Windows VM and 2 that needed native Windows (BG3 and Until Dawn) but tbh I have a feeling its an AMD issue not a wine issue
What do you mean they’re failing to install? That sounds like a wine issue.
Sometimes games just work better on previous wine versions so it might be worth trying a couple of those.
I haven’t played the game but it seems to be DX11 so DXVK probably needs to be installed to the prefix
Towards the end of the FG installer, there is usually an option to download the dependencies so make sure you have those installed with winetricks to the correct prefix. C++ Redist download option here refers to vcrun in winetricks and its probably vcrun2022 since the game is new.
Is it defaulting to using your integrated graphics instead of the discreet gpu?
You could also add it as a non steam game in steam since proton will be set up properly to see if it runs better.
Edit:
470
Do you need to update your drivers? 470 came out in April 2021. DXVK only supports 510 and later so d3dcompiler instead of dxvk should be used but a driver update would be better.
Use uBlock Origin, you’re being redirected by ads. I tested downloading Icarus just now and this is where the links led to. gamebounty -> filecrypt -> datanodes. Datanodes started the download, ~30GiB 7zip file. I didn’t get any ads or redirects using Ublock Origin and a Firefox based browser.
I would suggest reading the very top of the megathread, the part that says" Not so fast sailor! Do this first"
Just tar and zstd. They’re probably installed by default for most distros anyway.
I think this is what I used when I first tried out zstd https://linuxconfig.org/how-to-install-and-use-zstd-compression-tool-on-linux
Tar supports input from zstd so I put everything on one line.
tar -I 'zstd -v --ultra -22' -cvf YourFile.tar.zst -C /path/to/your/file YourFile
-I takes the input from zstd which is in quotes.
–ultra it should be redundant but for some reason its needed for higher levels of compression.
-22 the highest level of compression offered by zstd.
-c for compress.
-v for verbose.
-f for the file name.
-C excludes the absolute path to the file/directory and just takes YourFile as the file/directory to compress. Its not needed if you’re in the same directory as YourFile.
I would recommend leaving out
--ultra -22
and just test how much compression you get with the default level first because 22 is super slow and if it just can’t compress the file you won’t see any difference in file size compared to the default compression level.
For 3DS games I use NDSTokyoTrim to remove useless data from the game files to make them smaller.
DreamCast, PS1 & PS2 games get compressed to chd with chdman.
GameCube and Wii are compressed to rvz with Dolphin.
PS3 I remove the PS3_UPDATE folder, 256MiB for each game adds up. I also use Gnarly Repacks for PS3 games since they have better compression than anything I’ve tried so far.
Switch games, I use nsz.
Then I use tar with zst on all of them, Nsz and rvz already use zst so theres no change but I just like to keep everything the same accross all of my roms and pc games.
Everything else, GB, NDS, SNES etc all get archived and compressed with tar and zst. For these I’ll also use the --ultra -22 option since they’re small enough files anyway so they don’t take long to compress/decompress. If anyone knows any specific compression/trimming methods that are better than zst, I’d love to hear about them!
Copies of all the tar archives are kept on 2 separate drives and a copy of the games are on my PC in whatever the smallest format is that is compatible with their emulator.
The information that has been exposed from this incident includes full names, usernames, profile photos, sex, date of birth, genetic ancestry results, and geographical location.
The threat actor accessed a small number of 23andMe accounts and then scraped the data of their DNA Relative matches, which shows how opting into a feature can have unexpected privacy consequences.
They can be linked to other online accounts. This allows for phishing, potentially scamming or getting additonal information on them which can lead to more sophisticated/personalised scams. Older, less tech savvy users are better targets for scammers.
Data aggregators can sell this info to Health Insurance Companies or any other system who can then discriminate based on genes sex age or location
Can contribute to people committing fraud with their information if they collect enough information from different sources.
Having enough information about a user to use it to target their now known relatives in personalised scams.
The people that did this probably didn’t know what information they were going to get, maybe they were hoping for payment info, and settled for trying to just sell what they got.
Any information, no matter how useless it might seem, is better than no information and enough useless information in the wrong hands can be very valuable.
Theres countless data breaches every year and people will collect it all and link different accounts from different breaches until they have enough information. Most people use the same email address for every website and a lot of people reuse the same passwords, which is how this data leak occurred. Knowing that these users reuse the same email/password combination here means theres a very good chance they’ve reused it elsewhere.
You can check out what data breeches have occured and if your email or password has been posted in any of these dumps here https://haveibeenpwned.com/
Once the information is out there, its out there for good and what might seem trivial now to you could be valuable tomorrow to someone else
Around 16 TiB and I keep 3 copies of everything so 48 TiB used of around 65TiB. I encoded all my TV shows and most of my movies with AV1 and keep most of my files compressed, which saves a bunch of space so hopefully I won’t need more drives any time soon
Theres at least 4 websites in the megathread under the ROMs section that have a bunch of Switch games. 3 begin with N and 1 begins with Z. In the FAQ section of the Z website is where I got keys and firmware
Pretty sure its because of the piracy shield thingy. Secure Core might be an option as long as no Italian servers are used and you’re using the VPNs DNS
“[A]ll parties in any capacity involved in the accessibility of illegally disseminated content – and therefore also, by way of example and not limitation – VPN and open DNS service providers, will have to execute the blocks requested by the Authority [AGCOM],” the notice read.
I see the Extend part of Embrace Extend Extinguish is about to start…
Use one of the websites in the megathread, unless you want to use the dev tools on a pc to find the video source link and try to download it from there but thats a whole lot of unnecessary effort
??? Theres a download button beside the play button that gives a bunch of sources and each source has a torrent file or magnet link to add to your torrent client
I’ve used https://github.com/Softcatala/whisper-ctranslate2 before for transcribing English and translating non English audio into srt files and its been pretty good for TV shows for me. Its not perfect but it usually gets me about 95% of the way there
Tl;dr Step by step how I setup lutris to run pirated games
I use Lutris, its pretty easy to setup and is pretty much the same setup for most games.
Install lutris wine and winetricks with your package manager. Wine is a windows compatibility layer for linux and winetricks is a helper for downloading and dependencies that a game might need and lutris integrates both of these.
In the file manager, I like to create a folder with the name of the game and then inside of that folder I make 2 folders “game” and “prefix” I put all of the game files in the game folder and leave the prefix folder empty for now.
When you open lutris, on the left, hover over wine and click on the little box icon to manage the wine versions. I recommend, wine-ge. Its a custom build/fork of Steams Proton that adds some extra stuff
Once you have installed that, back on the main page at the top left is a + to add a new game. Select the bottom option, “Add locally installed game”. Give the game name and select “wine” as the runner from the dropdown.
Then on the next tab, Game Options, select the games executable location, inside the “game” folder. Set the Working directory as the “game” folder. You can just copy the path that you put in the executable section and backspace until the folder called “game”.
For wine prefix, copy the working directory path and replace “game” with “prefix” this is where all the wine/windows stuff will install.
Set the Prefix architecture to 64-bit
On the next tab, Runner Options, you can select the wine version you want to use. It should default to the wine-ge version you installed. At the top right press save and your game should be good to go. There are a whole bunch of other options you can play around with but for pretty much every game I’ve played I just leave them as default.
This should be fine for most games but sometimes wine updates can break older games and so you may have to try older versions of wine-ge or different versions of wine like lutris-fshack or wine-staging. Or the game may need a special dependency that you need to install. This is why I set a separate prefix directory for each game.
You can look at the logs for a game by selecting it and pressing the arrow beside the play button, this may or may not be helpful for trouble shooting.
If you do need to install an additional dependency, select the game and press the arrow at the bottom right and select winetricks. “Select the default prefix” should be selected by default, press ok and at the top of the next screen you should see the path to the games prefix, then select the “Install a Windows DLL or component” Then you should have a list of packages you can install.
If you’re using a repack that needs to be extracted, put the path to setup.exe as the executable on the Game Options tab and run through the installer, selecting the “game” folder that you created as the install location, it is probably under the Z drive. Then when you’re done installing, right click the game in lutris and press configure and then back to game options and replace the setup.exe path with the path to the games exe and save.
There’s a whole bunch of other ways to do this, like bottles or just using system wine or adding the game as a non-steam game to Steam, I have a separate throwaway Steam account for this.
I like the way lutris is laid out and I like having separate prefixes for each game because I archive the games I like and its nice to have a known working prefix in that archive for games I had issues running.
The size of the file and speed shouldn’t be an issue, unless its crazy high speeds, I’m seeding a bunch of 80+ GB files, I think for me it was the number of connections being made that was causing the disconnects for me.
I assume its not something basic like the ProtonVPN subscription lapsed or one of the issues mentioned in the link in the logs https://github.com/qdm12/gluetun-wiki/blob/main/faq/healthcheck.md
I’d try a few different countries and see if its that specific one, I like to have 3 different countries listed in my compose files so if there are issues with one countries servers it just connects to the next country instead
You could also try switching between wireguard and openvpn configs to see if that helps https://github.com/qdm12/gluetun-wiki/blob/main/setup/providers/custom.md#wireguard
Are you seeding a lot of torrents?
Something similar kept happening to me last year, constantly disconnecting no matter what I tried. I thought it was a gluetun issue so I stopped using docker and tried the official ProtonVPN app, openvpn, wireguard and community version of protonvpn, I tried switching from arch to ubuntu on my NAS and the same thing kept happening.
I was convinced it was a hardware issue so I tried different hardware, same issues.
The only thing that fixed it was reducing the number of torrents I had seeding. At the time I had ~500 and once I lowered it, I stopped disconnecting.
Now I run 3 gluetun containers with 1 qbittorrent container connected to each and they each have ~400 torrents seeding and I haven’t had any issues since.
Fennec is a Firefox fork on F-droid, use this as your browser and install ublock origin as your adblocker. Top right menu in fennc then press add-ons and find ublock origin and install it. Customise by pressing the top right menu of fennec -> add-ons -> ublock origin -> settings
Then just use the direct download sites in the megathread to download your files from. You can follow something like this video to harden ublock and make sure you block the ads that pretend to be download links.
OR
If you want to seed (upload the files you download from the torrent) back to other people like you, then use fennec, the same as above, but use the torrent sites linked in the mega thread instead of direct download sites and use a torrent client like libretorent on the F-droid repo to add the magnet links or torrent files you get from these sites. It will start downloading the files and also uploading the parts you have downloaded to other people that want them.
I always recommend a VPN and on android you can turn on always on VPN and and block connections without VPN in android settings but that’s up to you and what your country is like when it comes to piracy
OR
Others might be able to suggest a streaming setup? But I don’t stream anything so can’t help you there
I use tags and categories in qbittorrent to know if I have made copies of the files to other disks, you could do something similar by naming with a sticky note/ label and making a corresponding category in qb
I also use tree to list all of my TV episodes individually so I can mark off the ones that I’ve reencoded and added subtitles to. You could keep similar text files with trees of each drive in your home directory to quickly search them to see which drive has the file you’re looking for
The link you posted sends me to Mayerthorpe on imdb so typed that in on btdig(.)com and the first result is “Mayerthorpe.2008.SatRip.avi” this might be it? Does the movie have different names in different regions?
I swear this is an old photo from at least a few months ago. I remember people joking about the caravan and boat being so extravagant