I have a self-hosted Baikal server with self-signed CA on Android 14 and it works.

However, I didn’t had to add the certificate to Davx⁵ itself. Adding a rootCA into your device and your reverse proxy handling the request should work as expected over https.

Those kind of things are difficult to troubleshoot, this could be:

• Bad rootCA certificate, missing the necessary options ?
• Wrong certificate handled by your reverse proxy ?
• Radicale doesn’t recognize your certificate extension ?
• Wrong networking configuration ?
• Bug ?
• …

We need more infos about your setup:

• Do you use a reverse proxy ?
• Had you already any success with this certificate within an other application ?
• Any logs from your Android, Davx⁵?

Yeaaah I already played a bit arround with step-ca ! Right now a make a mini-CA with openssl.

When I get more comfortable with how everything works together I will surely give step-ca another try.

Can’t argue against that.

However, I prefer local domain names accessible via Wireguard with self-signed certs. I like to understand how everything works under the hood !

Also, I’m broke AF and buying a domain name (even cheap ones) are out of my budget :(.

Except for the learning process and if you want your self-signed local domains in your lan !

https://jellyfin.homelab.domain is easier to access than IP addresses.

While I’m not able to give it a try right now (just woke up, need to get ready for work…) I just wanna thank you for sharing your work and contributing to the community !!

It looks neat and simple :) !!!

I never played the SH serie, not because it looks bad but because it looked way to scary to play back in the days.

I have only heard good things about it, but I think I would profit more playing the remake, because graphics, sound design and technology changed way to much.

I know all of the die hard fans are going to down vote… The power of nostalgia. But have you tried to replay the first tomb rider, first metal gear, first resident evil…? While they left some good memories from the past, replaying them today will just scatter your memories into some strange soup-feeling you wished you never touched !

Either way, I’m happy I can finally give SH2 a shot :) I heard it was the best from the serie.

IMO The Fedi Origami looks waaay better than the 3 cat but holes. Even the first iteration looks somehow better, even though less “professional”?

Now that I know a bit more about security and obfuscation I rather not use any pirated games/software anymore. If they know how to crack/reverse engineer some complicated stuff, you can be sure they add some shady stuff in it.

• silent cryptominer
• info stealer
• hidden DNS ads requests
• trojan
• …

They need somehow a way to earn there living expanses ? It’s a service we think it’s free but nothing comes without a counterpart.

Yep, Debian for sure ! 3 years ago I settled for debian on an old spare laptop, It’s still cruisen with more than 21 containers !! Sure I had a few fresh installs because skill issues, lack of proper configuration, user mistakes… But it’s probably the easiest to maintain and learn as a beginner !

No idea what’s your level and how close you’re with computers and how much time you have to spare, but don’t be afraid to make mistakes and try a few things out.

If you are like me just a plain old geek who knew his way arround computers and used Hamachi back in the days, thinking you were a HAKKER… Get ready to get your ass kicked !

While self-hosting and de-googling is fun, it also has alot of negative things:

• Time consuming
• Involves ALOT of Searxing/Reading
• Debuggin (kinda…)
• Learning the basics of at least 1 scripting language (consider bash your ally)
• It’s an infinite rabbit hole that will suck you in and sometimes get to your nerves…

One of the best advice I could give you along the way is, If you’re stuck on a bug or something isn’t working as expected in your setup and It seems you couldn’t find any answer or similar issues on the web, you absolutly have to take a break, not a 5min cigarette break… A few hours bicycle/sleep break !!!

The next day you will for sure find a solution !!

Good luck, have fun and don’t forget to take time for yourself and people arround you !

Raspberry PIs run ARN

Sooo RPis are now processing proteins ? XD sorry I’m bit drunk… Thank for the short insight, was too lazy to click !!

Ohhh didn’t knew that ! Thanks for the info! Although it makes sense :).

Will edit my comment !

PS: Yeah, when my internet went down I was like “huh what the fuck?” XD

I don’t mind if my server is going to have to transcode for most clients

I mean AV1 is very well supported on most clients/new devices these days. While I do not know any good groups that only encodes in AV1, I personally download high quality BD rips and re-encode them to SVT-AV1 without any visual quality loss (for my personal taste and perspective).

I’m not an audiophile or videophile and do not have the necessary devices to decode high end 1080p nor 4k video streams.

About AV1 I think only iOS devices do not have a native software/hardware AV1 decoder (I migh be wrong here).

As for your question, I wish there were more encoders that do AV1 :/

You can always try out their free Tier.

While you get limited bandwidth it’s really okayish for normal use. Do not try to connect over a peer2peer connection, it’s disabled in the free tier and your connection goes "Wooosh! *

I’m very Happy with their free tier, I even route my mobile’s traffic through the same VPN connection with wireguard and some iptables.

*Edit

Soo nya.sii is going down soon… Uuhg !

Like others said the arr stack is probably what you’re looking for. If you’re only looking to rename files sonarr will fill you in ! Look at the documentation, I only use sonarr to rename my local files !

Other thing to consider, is this cool github project TVMV which also renames the files but you need to register to create an API key from TMDB (its free and you can fill in dummy informations). But it’s less customizable. I’m only using it to rename files if their name is in a different language than English.

About metadata, I don’t know if there’s a bulk and recursive metadata editor and dunno if sonarr fills in the gap. However, mkvtool and bash scripting is probably going to be your tools here.

How I would go about it:

• rename your files with sonarr putting all the important stuff in the filename
• bash script with mkvtool to strip and copy portions of the title name and add them in the corresponding metadata field.

There’s probably a better way to stripe metadata from sites like tvdb but I’m not a dev so it’s totally out of my scope and knowledge.

I like linkding alot for it’s simplicity, but can’t the hell of me make a good/clean instance… It gets messy very quickly if you save some interesting links which are not directly connected to something or if you have 2 different subjects in the same instance.

Something like group tagging would make alot of sense :/

Traefik gang here 👊 !

But only because it works so easily with docker !! I remember a time where I though that you need a diploma and read/learn/understand a 10000 page dictionary to make nginx work properly.

Also hated the syntax of nginx… It can look so ugly and gibberish :/.

But I do believe Nginx is superior and more mature in many more aspects than Treafik. Still, Traefik is a breeze and is in IMO way easier to configure with docker than Nginx.

Wow perfect write-up ! Thanks for your hard work !

I hope someone will be motivated enough to translate it to Treafik ! I’m not versed enough to actually mess with the config files on such level… Let alone to understand Nginx’s syntax 🫠 but very cool for Nginx users !!!

Thanks :)) I did tried it out a few month ago. It works as expected, but I was looking for something with a nice webUI wich pulls the whole changelog before updating a container.

An AIO web interface that give all the changes and expected bugs or issues. I know there isn’t something like that… That’s why I just look out for github notifications with an RSS feed and read through all the changes/issues before doing any updates.

KISS ! That’s the way I’m doing it. Although it kinda gets more difficult to keep track of every docker image update after you have a dozen containers.

Thinking of something that could keep track and give me a nice notification about the changes and give a link to the github page before updating the container.