When my daughter was 10 months, she wriggled off the sofa and bashed her bottom lip. I rushed to pick her up to make sure she was okay, and as I did, a tiny trickle of blood welled up from her split lip.
She was perfectly fine, made loads of friends at the hospital. But in that moment, if there was a cliff next to me, I’d have jumped off of it.
If someone else hurt them, or dropped a bomb on them, the whole world wouldn’t be safe. I can’t imagine what’s that guy is feeling.
Buster’s slightly concerned he’s about to be replaced with bookworm
I never solved this issue. I just tried to solve all merges through the cli on a laptop or desktop. Eventually, I switched to syncthing, and I haven’t looked back.
They were thinking the same thing the same thing the cable execs were thinking.
“If they have to buy both our service and others, then other service are not my competition.”
”We’re going to rape these motherfuckers”
So I’ve implemented Obsidian Git, and it works really well. The only trouble I’ve had is on iOS (I’ve got m it on android, fedora, debian and windows) where it’s bot supporting merge changes.
I’m considering moving to logseq and implementing the same.
The other alternative to self hosting is ‘SyncThing’. After I introduced my dad to obsidian, I saw how he did his synchronization with it, and it looks like a lot less overhead - fairly compelling
Happy to share some notes on my setup and his if you like
This is also true for UDP and ICMP connections, in case anyone reading wasn’t sure. This is how you’re able to ping stream and browse from behind your regular firewalls
I’d hesitate to call it truly enterprise, but I’ve used the 24 port/10Gbe version of these in a datacenter. Not many issues to write home about - seems to handle vlanning pretty well.
Has 10Gbe uplinks, US power, and PoE+. Probably access to a fancy dashboard too.
$1600 is probably as cheap as you’re getting.
Edit: Oh yeah, they’re probably not dual attached, and the ‘redundant power supply’ (RPS) is a separate appliance, which I consider kinda bullshit, that takes up another U.
I’ve had no trouble with actual switching performance though fwiw.
Edit 2: They’re probably compatible with the AR mobile app, which is hella cool, and somewhat useful in customer sites.
Do not forget to log out and log back in after you add yourself to a new group. Your desktop environment is a program, and it won’t know about the update until you spawn a new graphical shell with the updated permissions.
Just in case it’s not clear from the replies - you can edit pdfs in libre office draw. Text, images, arangements, whatever. It’s all editable.
Lining up the wires, ensuring they’re straight and making sure they’re trimmed to the same length will help avoid crossover too.
You can help straighten them on the square edge of a table, just press them between your finger and the table at the part that’s stripped from the insulation, then pull them over the edge applying pressure the whole time.
You can also look for the newer cat 6 connectors. Lots of brands have an insert that you can slot the wires in to before putting them in the housing, which helps a lot.
Example here: https://www.amazon.com/W-NECTOUN-100-PACK-Connectors-Ethernet-Connector/dp/B0B1DHQCP7/
Sweet! Yeah, I’m guessing that the iptables-mangle and landing page link setup relies on getting that IP before populating the page, and that it’s not reactive to changing IP address. It might have worked if you were disconnecting networking all together, and joining a different network, but with the wonky way wifi roaming actually works, the mediabox management scripts probably never noticed there was a need to re-trigger.
You’re looking for mdns! Depends on which distro you’re on. For apt based stuff like mint, look for mdns (used to be libnss-mdns on raspberry pis, guessing it’s the same for mint? It’ll install avahi zeroconf stuff if it’s not there already. Check the service is running, then ping $HOSTNAME.local - replace with whatever your host name is.
If you’re starting the mediabox setup on the isp network, it’s doing local natting with iptables, based on the IP that it resolves from the hostname. Probably would need to shut down and re-up to walk between the deco’s and the isp wifi domains.
I agree with the other comments, looks like you might be in a double NAT scenario - fortunately for you, I think I know how to fix it, seeing as we’re both running deco’s!
You want to go into the smartphone app, go to ‘More’ at the bottom right, (as opposed to ‘Network’), Advanced > Operation Mode > Access point.
Be aware this will cause a disruption, and anything connected to them will need to be reconnected so it gets dhcp/ip addressing from the isp router rather than the deco.
The other alternative is, if they’re already in AP mode, it might be recognizing the deco SSID as a separate network to your ISP’s router, and randomizing your mac address (for anonymity across airports and hotels and such). Then, with your original mac address holding the first IP in lease, your ‘new’ mac address gets a different one. Check your mac with ip link too when connected to the two different networks, and see if you can find an option to set it manually for both networks, or just use your default one for those networks.
I’d love to hear how you get on, I’ve been putting off building this exact solution (mediabox) from scratch, had no idea there was a project set up to run it all
The extra lines are probably the Markdown syntax converting existing formatting - a single line in rendered text are represented as double lines in markdown source. E.g. by default, copying html with single lines will convert to markdown, which represents them as double lines.
Try adding a shift to the paste command to paste without converting the formatting on text in the clipboard across to markdown. Or there’s a convert from HTML toggle in preferences under Editor.
Vim bindings, as far as I can tell is exactly as vim proper is - any vim cheat-sheet would get you started. However, if Obsidian has a hotkey set that collides with default vim bindings, it seems to pick at random either to do nothing or run the obsidian interface shortcut. Search your hotkeys and rebind if a vim command seems broken!
Can you give us some more details about how your network, mesh and machines are setup?
Are you trying to access the containers from the machine they’re running on, or from a different machine?
Is the container host moving between different AP’s, or is it on ethernet?
What IP address do you get when connected to the different access points? Does it change?
Are your access points in Access Point only mode, or are they acting as routers? What brand/model?
How are the mesh access points connected - powerline, ethernet, wifi meshing?
Amen. Also they tend to draw less power than your average cheap desktop, so it’s a great middle ground between pc and sbc
Calibre is the way to go. It’ll convert quite happily to epub, html, whatever. I just converted the Linux From Scratch book pdf in to epub and mobi for my kindle.
If you just need to edit a pdf and change some formatting on a line, try LibreOffice Draw!
I would not consider Mermaid complete enough for network diagramming. The very basics are possible, but try to describe anything more complicated throws off the placement and makes the pathing whacky.
Straight flow charts are the closest you can get to a network diagram, so if you try to draw a link that travels back up the chart, it breaks mermaid’s brain trying to figure out the order of decision points (network devices).
The allure of text based diagrams is so tantalizing - but if you need them to be functional, it’s not going to happen
There’s an issue tracking the need a new diagram type to handle it.
If the files exist, are regular, are correct and the permissions don’t prohibit access, maybe there’s something else blocking the connection attempt.
Given that it’s ubuntu, could it be an AppArmor thing? Not sure if that’s enabled by default these days.
Seems to me like it can’t run the binaries, so there’s nothing listening on the sockets you’ve specified. Fix the bin-path issue, fix the problem
No, and it’s not available on the official Play app store for Android either.
You can install it via APK or the F-Droid open source appstore. I haven’t found anything to replace it on iPhone at all.
He could do with a few more.